FM35 Flail Mower

FM35

The FM35 walk-behind flail mower is designed to combat the most demanding environments and is ideal for mowing rough and overgrown areas. The strong welded steel construction houses a robust flail rotor of 122 cm cutting width with 34 independent flail blades which deliver excellent cutting action. This efficient flail mower is designed to excel in applications such as landscaping, agriculture, utility, maintenance, construction sites, road right-of ways, trails, and all other areas needing brush or overgrown area control. Cut, mulch and spread, leaving a fine finish, with the FM35 walk-behind flail mower.

fm35-L-500
MODEL ENGINE DECK
FM35BV2648CE 26 HP* Vanguard™ V-Twin 810cc Air Cooled Petrol 122 cm - 48” Deck Flail mower
* ALL POWER LEVELS ARE STATED GROSS HORSEPOWER AT 3600 RPM PER SAE J1940 AS RATED BY BRIGGS & STRATTON.

HIGHLIGHTS

fm35-cutters

34 J-type flail cutters

34 J-type flail cutters, rotor bearing debris shields and flexible rubber debris guards.
fm35-design-cutter

Rotor design

Swept lug design which is more forgiving for accidental impacts.
fm35-guards

Protective guards

Impact protective guards to avoid damage to rotor bearings and belt drive system.
fm35-rotor

Rotor bearing protection

Rotor bearing protection and adjustable hardened skid plates.
fm35-shaft

Shaft driven construction

Strong shaft driven construction with gearbox and universal joint between engine and flail rotor.
fm35-belt-wrap

Over 180 degrees belt wrap

More than 180 degree belt wrap on drive system from shaft drive to flail rotor to ensure power transmission to rotor. Rotor drive powered by a bonded duplex belt.

FEATURES

ENGINE GROUP
  • Powered by Vanguard V-Twin 810cc air cooled petrol engine.
  • Two-stage industrial air-cleaner.
  • Electric start.
  • Easy to use oil drain tube.
  • 19 litres fuel tank.
DRIVE SYSTEM
  • Independent, commercial grade Hydro-Gear® ZT-3100 transaxles, features 18 cm cooling fans that also assist in repelling debris.
  • Dual elevated hydro fluid reservoirs and dual hydro filters.
  • Easy access to tracking adjustment.
  • Ground speed up to 11 km/h.
OPERATOR CONTROL & COMFORT SYSTEMS
  • Steel channel handlebars for increased strength and durability.
  • Cruise control bar.
  • Independant steering handles.
  • Independant override thumbs controls.
  • Convenient drive speed indicator.
  • 20” Drive tyres with chevron tread.
  • Flat free caster tyres assembly.
  • Overall width front bumper.
  • Hour meter.
FLAIL HEAD
  • Available with 122 cm flail mower.
  • Cutting height: 5,0 - 8,9 cm / 2,0” - 3,5”.
  • 6 Height of cut positions.
  • 34 Swinging flail cutters.
CHASSIS
  • Heavy duty 3,0 mm, 38x51 mm frame rails.
  • 6,35 mm Engine mounting platform.
  • Convenient built in tie-down points for securing equipment.
  • Control rods securely placed above the engine deck and within the handle bars for optimized protection against damage and dirt.

SPECIFICATIONS

 FM35BV2648CE
‡ See your dealer for warranty details.
* All power levels are stated gross horsepower at 3600 RPM per SAE J1940 as rated by Briggs & Stratton.
ENGINE
MakeVanguard - Petrol
Model810cc
Horsepower26,0 HP*
Cylinders / Displacement2 Cylinders V-Twin / 810 cc
CoolingAir-cooled
PTOElectric PTO clutch
StartingElectric
Fuel Capacity (litres)19 Litres
MOWER
Cutting width (cm/inch)122 cm / 48” Flail mower
Deck ConfigurationUp-milling flail rotor
Cutting Height (cm)5,0 - 8,9 cm
Deck Construction3,4 / 4,6 mm fabricated construction with secondary internal shroud
Mower SpindlesDrum type 102 mm with 34 individual swinging cutters
Deck lift system5 Individual spacers
SUSPENSION & DRIVE TRAIN
SuspensionN.A.
TransmissionIndependent Hydro-Gear® ZT-3100™ transaxles
Drive Axles25,4 mm Tapered with 4-bolt flange
Drive Tyres (inch)20 x 8.00 - 10 (4 ply) chevron tread
Caster Tyres (inch)9 x 3.50 - 4 (4 ply) flat free
GROUND SPEED
Speed-fwd. (km/h)0 - 11 km/h
Speed-rev. (km/h)0 - 4,5 km/h
DIMENSIONS
Overall length (cm)210
Overall width (cm)140
Dry weight (kg)354
OPERATOR CONTROL & COMFORT SYSTEMS
Roll-Over Protection StructureN.A.
InstrumentationSpeed indicator, hour meter
ControlsOperator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Parking Brake / Safety CircuitIntegrated transaxle brake
WARRANTY
Engine3-Year Manufacturer’s Limited Warranty
Deck Drive Belt1-Year Limited/100 hours, whichever comes first, on parts & labor.
Balance of machine2-Year Limited Warranty commercial use, unlimited hours, front-to-rear, parts & labor. Belts, Tyres, Brake Pads, Battery, Blades: 90 days‡

By continuing to use the site, you agree to the use of cookies. View our Cookie Policy

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close