Ferris FW35 Commercial Walk Behind Mower

FW35

The FW35 dual hydrostatic walk-behind mower was built from the ground up to meet the demands of professional mowing crews. The new design gives this mower smoother and more user-friendly operation. Featuring a cruise control bar, independent retraction lever steering, thumb controlled speed override, foot operated return-to-neutral controls and a speed indicator. The super tough built, 6mm thick engine deck, offers a low center point of gravity and a wide stance that result in unparalleled traction and stability.

MODEL ENGINE DECK
FW35BV2648RDCE 26 HP* Vanguard™ V-Twin 810cc Air-cooled Petrol 122 cm - 48” Rear discharge mower deck
FW35BV2652RDCE 26 HP* Vanguard™ V-Twin 810cc Air-cooled Petrol 132 cm - 52” Rear discharge mower deck
* ALL POWER LEVELS ARE STATED GROSS HORSEPOWER AT 3600 RPM PER SAE J1940 AS RATED BY BRIGGS & STRATTON.

HIGHLIGHTS

Easy deck adjustment

The deck is easily adjusted by the single-point quick adjust lever which can be locked away securely.

Mower deck mounting system

The new mower deck mounting system provides easier deck leveling, improved flexibility over terrain, and more durable wear points for reduced maintenance.

Even belt tension

Deck drive belt system is designed to provide even belt tension which improves the life of the belt and reduces maintenance.

Cruise Control bar

Reliably set your speed with the new cruise control bar featuring a convenient speed indicator.

Centralized foot control

New centralized foot control for neutral position provides the operator with a more natural control. The neutral position is identified on the speed indicator on the dash.

Transmission guards

Narrow transmission guards reduce debris built up to improve air flow and allow for access to the oil filter for maintenance.

FEATURES

ENGINE GROUP
  • Powered by Vanguard V-Twin 810cc air cooled petrol engine.
  • Two-stage industrial air-cleaner.
  • Electric start.
  • Easy to use oil drain tube.
  • 19 litres fuel tank.
DRIVE SYSTEM
  • Independent, commercial grade Hydro-Gear® ZT-3100™ transaxles, features 18 cm cooling fans that also assist in repelling debris.
  • Dual elevated hydro fluid reservoirs and dual hydro filters.
  • Ground speed up to 11 km/h.
  • Easy access to tracking adjustment.
OPERATOR CONTROL & COMFORT SYSTEMS
  • Steel channel handlebars for increased strength and durability.
  • Cruise control bar.
  • Independant steering handles.
  • Independant override thumb controls.
  • Convenient drive speed indicator.
  • 20” Drive tyres.
  • Flat free caster tyres.
  • Hour meter.
MOWER DECK
  • Available in 122 cm and 132 cm cutting widths.
  • Fabricated deck construction with double top deck, overlap welded corners and double reinforced side skirts and steel reinforced leading edge.
  • Single lever cutting height adjustment, lockable.
  • Cutting height: 3,8 - 12,0 cm.
  • Features top greaseable aluminium spindles.
  • Factory fitted rear discharge/mulching insert and mulching blades.
CHASSIS
  • Heavy duty 3,0 mm, 38 x 51 mm frame rails.
  • 6,35 mm Engine mounting platform.
  • Convenient built in tie-down points for securing equipment.
  • Control rods securely placed above the engine deck and within the handle bars for optimized protection against damage and dirt.

SPECIFICATIONS

 FW35BV2652RDCEFW35BV2648CE
‡ See your dealer for warranty details.
* All power levels are stated gross horsepower at 3600 RPM per SAE J1940 as rated by Briggs & Stratton.
ENGINE
MakeVanguard - PetrolVanguard - Petrol
Model810cc810cc
Horsepower26,0 HP*26,0 HP*
Cylinders / Displacement2 Cylinders V-Twin / 810 cc2 Cylinders V-Twin / 810 cc
CoolingAir-cooledAir-cooled
PTOElectric PTO clutchElectric PTO clutch
StartingElectricElectric
Fuel Capacity (litres)19 Litres19 Litres
MOWER
Cutting width (cm/inch)132 cm / 52” Rear Discharge122 cm / 48” Rear Discharge
Deck ConfigurationRear discharge/mulching insert and mulching bladesRear discharge/mulching insert and mulching blades
Cutting Height (cm)3,8 - 12,0 cm3,8 - 12,0 cm
Deck Construction3,4 mm fabricated construction, full width double top
deck, 6,4 mm scuff guards, 9.5 mm leading edge,
overlap welded corners
3,4 mm fabricated construction, full width double top
deck, 6,4 mm scuff guards, 9.5 mm leading edge,
overlap welded corners
Mower SpindlesCast aluminium 133 mm; 25,4 mm shaftCast aluminium 133 mm; 25,4 mm shaft
Deck lift systemCentral height adjustment with single hand wheelCentral height adjustment with single hand wheel
SUSPENSION & DRIVE TRAIN
SuspensionN.A.N.A.
TransmissionIndependent Hydro-Gear® ZT-3100™ transaxlesIndependent Hydro-Gear® ZT-3100™ transaxles
Drive Axles25,4 mm Tapered with 4-bolt flange25,4 mm Tapered with 4-bolt flange
Drive Tyres (inch)20 x 8.00 - 10 (4 ply) 20 x 7.00 - 10 (4 ply)
Caster Tyres (inch)11 x 4.00 - 5 (4 ply) flat free11 x 4.00 - 5 (4 ply) flat free
GROUND SPEED
Speed-fwd. (km/h)0 - 11 km/h0 - 11 km/h
Speed-rev. (km/h)0 - 4,5 km/h0 - 4,5 km/h
DIMENSIONS
Overall length (cm)200200
Overall width (cm)135125
Dry weight (kg)383380
OPERATOR CONTROL & COMFORT SYSTEMS
Roll-Over Protection StructureN.A.N.A.
InstrumentationSpeed indicator, hour meterSpeed indicator, hour meter
ControlsOperator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Operator presence, cruise Control Bar, independent
forward and reverse levers, Foot-activated neutral
Parking Brake / Safety CircuitIntegrated transaxle brakeIntegrated transaxle brake
WARRANTY
Engine3-Year Manufacturer’s Limited Warranty3-Year Manufacturer’s Limited Warranty
Deck Drive Belt1-Year Limited/100 hours, whichever comes first, on parts & labor.1-Year Limited/100 hours, whichever comes first, on parts & labor.
Balance of machine2-Year Limited Warranty commercial use, unlimited hours, front-to-rear, parts & labor. Belts, Tyres, Brake Pads, Battery, Blades: 90 days‡2-Year Limited Warranty commercial use, unlimited hours, front-to-rear, parts & labor. Belts, Tyres, Brake Pads, Battery, Blades: 90 days‡

By continuing to use the site, you agree to the use of cookies. View our Cookie Policy

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close